Servo – Precision Potentiometers

CP11 Servo

CP18 Servo

CP20 Servo

The Servo potentiometers are constructed with a precision ball bearing system and long life flush bonded conductive track. The wipers have multiple fingers to acheive low contact resistance. The Resistive Element is Conductive Plastic (CP).

Please open the Datasheets below for further information on the types of precision potentiometers we offer.

CP11 SERVO Datasheet

CP11 Precision Potentiometer.

Conductive Plastic (CP) Resistive Element, Suitable for standard 1.1″ hole.

CP18 SERVO Datasheet

CP18 Precision Potentiometer

Conductive Plastic (CP) Resistive Element, Suitable for standard 1.8″ hole.

CP20 SERVO Datasheet

CP20 Precision Potentiometer

Conductive Plastic (CP) Resistive Element, Suitable for standard 2.0″ hole.

This information is supplied in good faith but the customer is politely reminded that it is their responsibility to check the suitability of our products for their particular application, production techniques and processes. Please note that dimensions and technical data are for reference purposes only and, as it is the Company's policy to continuously improve our products, we reserve the right to incorporate changes without notice. May 2021

CastelcoTM and OmegTM are trademarks of Omeg Limited, Registered No. 600441,
Imberhorne Industrial Estate, East Grinstead, West Sussex RH19 1RJ Tel.+44(0)1342 410420

By continuing to use the site, you agree to the use of cookies. more information