Omeg CP11 Servo Potentiometer

'Make us a component part of your business'

OMEG CP11 SERVO POTENTIOMETER

The Servo Potentiometer is an angular feedback position sensor.

The OMEG range of servo potentiometers are constructed with a precision ball bearing system and long life flush bonded conductive track. The wipers are nickel silver based for low contact resistance.
Mountings are by bush and locknut, servo clamp or 2 hole fixing on the front face.
A centre tap is available to special order.

Electrical and Mechanical Specification

Power Dissipation at 20°C 0.5 W
Electrical Angle: 355°, 300°, 90° or special

Resistance Range: 1K to 50K
Resistance Tolerance: ± 10%
Independent Linearity: 1% standard
Insulation Resistance: 50 M ohms at 500V dc
Dielectric Strength: 1000 V rms
Temperature Coefficient: ± 200 ppm/°C
Temperature Range: - 65° C TO +130° C
Mechanical Rotation: 360° continuous
Starting Torque: 10 gm-cm Max.
Wiper Velocity: 1200°/sec Max.
Life: > 10 million cycles

To order, construct a part number from the following information as shown in the following example,
Part No. CP11/10K/300/3/12 means:

CP11
10K resistance
300° electrical angle
3mm spindle diameter(X)
12mm spindle length(L)

This information is supplied in good faith but the customer is politely reminded that it is their responsibility to check the suitability of our products for their particular application, production techniques and processes. Please note that all dimensions are for reference purposes only and, as it is the Company's policy to continuously improve our products, we reserve the right to incorporate changes without notice.