P20 2 Gang

Omeg Potentiometers and Switches can be produced to your requirements using our Product Builder or for special items contact sales

Images Representative of range

Datasheets with full details below

P20 2 Gang dimensions

Rated Power Dissipation @40°C for P20 potentiometers:

0.4W linear law
0.2W non linear law
Conductive polymer (plastic) track (over twice the life of carbon tracks)

Effective rotation: 256° nominal

Technical Data:

Life Expectancy of >20,000 cycles (tested at 30 times per minute)

Permissible Axial Spindle Load: 100 N (5 Sec. maximum)
Permissible Torque at End Stop: 80 N.cm
Rotation angle: 300° ±5°
Detents available upon request: Centre, 11, 21, 31, 41 positions

Operating Torque: 0.4 – 2.0 N.cm (Initial Torque may be higher)
Rotational torque of spindle can be made high or low

Insulation Resistance: >= 4 Gohms

Cylindrical, Flatted and Splined Spindle options (Alloy Spindles on request)

Rated Resistance: E3 Series (Optional: E6 Series)
Linear Law: 1K – 1M
Non linear Law: 4K7 – 470K

P20 angles of rotation

A = Initial termination
S = Wiper (or moving contact) termination
E = End termination

PC2G20BU Potentiometer

Printed Circuit (PC) Terminals

OW2G20BU Potentiometer

Ordinary Wiring (OW) Terminals. Recommended for Soldering

BR2G20BU Potentiometer

Bracket (BR) with PC Terminals