P20 Single

Omeg Potentiometers and Switches can be produced to your requirements using our Product Builder or for special items contact sales

Standard PC & OW versions are available from Amazon

Images Representative of range

Datasheets with full details below

P20 Potentiometer dimensions

Rated Power Dissipation @40°C for P20 potentiometers:

0.4W linear law
0.2W non linear law
Conductive polymer (plastic) track (over twice the life of carbon tracks)

Technical Data:

Life Expectancy of >20,000 cycles (tested at 30 times per minute)

Permissible Axial Spindle Load: 100 N (5 Sec. maximum)
Permissible Torque at End Stop: 80 N.cm
Rotation angle: 300° ±5°

Effective rotation: 256° nominal

Detents available upon request: Centre, 11, 21, 31, 41 positions

Operating Torque: 0.4 – 2.0 N.cm (Initial Torque may be higher)
Rotational torque of spindle can be made high or low

Insulation Resistance: >= 4 Gohms

Cylindrical, Flatted and Splined Spindle options (Alloy Spindles on request)

Rated Resistance: E3 Series (Optional: E6 Series)
Linear Law: 1K – 1M
Non linear Law: 4K7 – 470K

P20 angles of rotation

A = Initial termination
S = Wiper (or moving contact) termination
E = End termination

PC20BU Potentiometer

Printed Circuit (PC) Terminals

OW20BU Potentiometer

Ordinary Wiring (OW) Terminals. Recommended for soldering

Soldering Guidance

LT20BU Potentiometer

Terminals Bent Long Toward (LT) the spindle

LT20ST Potentiometer

Terminals bent Long Away (LT) from the spindle

3 versions available, with or without spindles

BR20BU Potentiometer

Bracketed (BR) potentiometer with PC terminals.

BR20SP Potentiometer (removable spindle version)

Bracketed (BR) potentiometer with PC terminals.

2 versions available, with Fixed or Removable spindles

LA20BU Potentiometer

Terminals bent Long Away (LA) from the spindle.

LA20SP Potentiometer

Terminals bent Long Away (LA) from the spindle

XA20BU Potentiometer

Terminals bent Extra Long Away (XA) from the spindle